160m – 10m
Bands
100 W
Output
1983
Introduced
FrequencyTX: 160-10m (amateur), RX: general coverage (GX 500 kHz-30 MHz; GXII 150 kHz-30 MHz)
Bands160m, 80m, 40m, 30m, 20m, 17m, 15m, 12m, 10m
TX power100 W (100W SSB/CW/FM. 25W AM. Also FT-757SX (10W QRP version).)
ModesUSB, LSB, CW, AM, FM, FSK
Weight5 kg (11 lb) - ~5.0-5.2 kg. Dimensions: 238×93×238 mm. Very compact for the era.
ConnectorSO-239
Year1983
Connectors
antennaSO-239
micmicrophone connector (MH-1B8 included)
keykey/paddle
catCAT control (rear panel)
accaccessory connectors
ext spkrexternal speaker
dc inDC 13.8V 19-20A
power reqDC 13.8V 19-20A. Optional FP-757HD power supply.

Estimated (unverified): Weight is about 5 kg (some sources cite ~15 lb / 6.8 kg, likely shipping). Dimensions 238 x 93 x 238 mm. FT-757GX introduced 1983; FT-757GXII ~1986-87.

compact full-featured solid-state HF transceiver; 160-10m; SSB/CW/AM/FM/FSK; 100 W FT-757GX (1983) and the improved FT-757GXII (~1986-87) triple-conversion superheterodyne (IFs 47.060 MHz / 8.215 MHz / 455 kHz) general-coverage receiver (GX: 500 kHz-30 MHz; GXII: 150 kHz-30 MHz) duct-flow cooling for full 100 W output at 100% duty cycle (good for data/RTTY) IF shift (GX); IF shift plus IF notch (GXII) adjustable noise blanker, electronic keyer, full and semi break-in CW, VOX, speech processor dual VFOs with split; 10 memory channels; RF attenuator; clarifier across the full RX range three microprocessors; CAT computer control; built-in surge protection compact (238 x 93 x 238 mm, ~5 kg); 13.8 V DC; optional FP-757HD power supply also sold as the Sommerkamp FT-757GX; FT-757SX is a 10 W QRP version
Strengths

A very compact 100-watt HF transceiver - a 238 mm cube weighing about 5 kg, small for 1983. It uses triple conversion with a general-coverage receiver, IF shift (plus an IF notch on the GXII), an electronic keyer and full break-in CW, and its duct-flow cooling allows full power at 100% duty cycle, which data and RTTY operators value. The clarifier covers the entire receive range, and it has CAT control and built-in surge protection.

Weaknesses

It is a 1980s rig with just 10 memories, no DSP, no 6 meters and no built-in tuner, and stability is about +/-10 ppm. The base GX lacks the IF notch the GXII adds. Beware online product pages that falsely claim USB ports, RF direct sampling and VHF/UHF - the FT-757GX has none of these; trust the manual.

Verdict

The FT-757GX showed that a full 100-watt, general-coverage HF station could fit in a 238 mm cube weighing about 5 kg - remarkably compact for 1983. Triple conversion, IF shift, an electronic keyer and full break-in make it a capable SSB/CW rig, and the GXII adds an IF notch and wider receive coverage. It is an affordable vintage Yaesu - just ignore online product pages that credit it with a USB port, RF direct sampling and VHF/UHF, none of which it has.

The Yaesu FT-757GX is a compact, full-featured solid-state HF transceiver from 1983 that became a popular all-around station and mobile rig. It covers the amateur bands from 160 through 10 meters with a general-coverage receiver (500 kHz to 30 MHz on the GX, 150 kHz to 30 MHz on the GXII), delivers 100 watts, and operates SSB, CW, AM, FM and FSK.

A notable engineering touch was its cooling: a diecast top and a duct-flow design that forces air through the whole transceiver, allowing full 100-watt output at 100% duty cycle in all modes - a real advantage for data and RTTY operators who key continuously. Compact (a 238 mm cube of about 5 kg) and reliable, the FT-757GX (and the improved GXII, which adds an IF notch and wider receive coverage) offered a lot of radio in a small footprint.

It remains a sought-after vintage rig for operators who want general-coverage HF in a manageable size. It is a discontinued classic. Compare it with the budget FT-747GX and the full-feature FT-767GX.